$895CDN  

The Pro Jack 4500 is an economical rolling jack that makes any four post lift complete. This versatile jack requires no air or electricity (optional air/hydraulic pump shown). It can be operated by a hydraulic hand pump. The Pro Jack 4500 is adjustable to fit most four-post lifts.

4,500 LB. capacity Manual or mechanical operation Scissor mechanism allows for level lifting Compact size with a low profile Adjustable width fits most four post lifts Safety lock positions Adapters included Powder coated finish Smooth rolling action Adapter storage Capacity 4,500 LB. Maximum Width 51" Minimum Width 29 1/2" Minimum Width with Arms In 39 1/2" Maximum Width with Arms Out 64 3/4" Minimum Height with Lift Pad 4 1/4" Lifting Pad 1 3/8" Short Adapter 1 1/4" Tall Adapter 5" Raised Height without Adapter 11 3/4" Raised Height with Small Adapter 13 1/2" Raised Height with Large Adapter 16 3/4" Raised Height with Sm. & Lg. Adapter 18 1/8" Shipping Weight 400 LB. Picture Below shows TWO Pro Jack 4500s The Direct Lift Pro Jack 4500 is just the perfect accessory for the Direct Lift Pro Park 9. The complete Direct Lift ProPark 9+ four post lift comes with a jack tray.  The jack tray has certain limitations that are eliminated by using the Direct Lift Pro Jack 4500. The jack tray (with a small floor jack or jack stands) will support ONLY THOSE LIFTING POINTS of the raised vehicle that are between the runways of the Direct Lift ProPark 9+ four post lift. The Direct Lift Pro Jack 4500 has telescoping arms that can be extended over the runways of the four post lift. The lift pads at the end of these arms can be positioned under the LIFTING POINTS (that are located over the runways of the four post lift) of the vehicle allowing the operator to access many more LIFTING POINTS than just using the jack tray. The Direct Lift Pro Jack 4500 is well equipped with expandable supports which adjust to fit a wide range of different brands of four post above ground lifts. These supports have a unique roller system that allows the rolling hydraulic jack to glide easily under the entire length of the vehicle. The large nylon rollers and heavy steel wheels allow the rolling jack to be positioned under the correct lifting points in a matter of seconds. The Direct Lift Pro Jack 4500 comes standard with a set of peg style truck adaptor which increase the lifting height of the lift pads. These truck adapters will allow the Direct Lift Pro Jack 4500 sliding hydraulic jack to raise pick-up trucks that will sit higher off the runways than the average passenger car. The Direct Lift Pro Jack 4500 can be operated with the manual hand pump that is also found on the Direct Lift Pro Jack 3500. The Direct Lift Pro Jack 4500 sliding hydraulic jack features two solid locking positions that are used when the vehicle is to be suspended above the runways. When the locking positions of the Direct Lift Pro Jack 4500 are engaged, the hydraulic pressure from the lifting cylinder of the Direct Lift 4500 is eliminated. (These locks act much like a pair of jack stands after you lift a vehicle off the ground with a service jack).